Cables

- Precision-machined cable ferrules for improved braking and shifting performance - A flat bottom on the inside prevents housing from pulling through ferrules. - 4mm ID for use with most shifting cables

- Complete cable kits for internal three speed hubs

- Shimano, Y8JA98020, SM-BH90, Olive and connecting insert

Shimano Ultegra OT-SP41 housing and polymer cable derailleur set. - Polymer-coated, stainless steel inner cable reduces the sliding resistance to achieve lighter and quicker operation and is rust resistant - OT-SP41 Housing is pre-lubricated with silicone grease - Sealed end caps to minimize dirt contamination - Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed - Diameter: 1.2mm - End Type: Shimano/SRAM - Housing Diameter: 4mm

- Time saving system for managing brake cables on Break-Away bikes - Light threaded alloy barrels with rubber noise dampener

- Sold in pairs - Allen wrench included

The Odyssey K-Shield Linear cable features a pre-stretched inner Slic Kable covered in a linear casing to prevent binding and an outer K-Shield mesh housing for less weight over a standard steel mesh housing (2.9 oz). - Black - 60 – 65mm

London Mod cable adapter for routing dual cables.

The Slic-Kable features a low friction inner wire for smooth braking. - 65-inch length

Jagwire's Double-End Straddle Cable is a replacement straddle cable (also called a crossover or transverse cable) for cantilever brakes.

Innovative Elite Ultra-Slick derailleur cables offer top end performance without the problems associated with coated cables. The cable surface is highly polished to remove friction causing imperfections on the cable surface. These cables are a great fit for bikes with full cable housing and modern drivetrains. - Diameter: 1.1mm - Double-ended: No - Highly polished, ultra-slick uncoated surface delivers incredibly accurate, smooth responses - Compatible with all performance housing and lubricants - Uncoated surface means there's nothing to flake off during installation or riding, so it delivers the most durable, consistent performance - Stainless steel wires are corrosion resistant

Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance. Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance. - Polished stainless steel construction for low friction - Compatible with all performance housing and lubricants - Cables are tinted gold for easy identification

Jagwire's Sport Inline Adjusters are installed on your shift cable housing sections so that you can fine-tune the shift cable tension by hand (without tools). They're great for keeping your shifting dialed in. They're precision made of lightweight aluminum and nylon for easy use and durability. To install them, remove the cables and housing sections, cut the top housing sections in two and rejoin the sections with the Inline Adjusters in the middle.

Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - SRAM/Shimano mountain compatible cable end - Stainless steel construction resists corrosion - Single end cable features weld-cut for easy installation

Giant's Derailleur Cable And Housing Set contains all the parts you need to get your bike's shifting back on track. The galvanized cable is double-ended for use with Campagnolo or Shimano/SRAM drivetrains. The full-length housing includes all necessary aluminum ferrules.

Giant's Brake Cable And Housing Set contains everything you need to get your braking power back. The galvanized cable is double-ended for use with road and mountain bikes and is compatible with almost all brakes. The full-length housing includes all necessary aluminum ferrules.

- Low-compression outer casing for predictable braking performance - A fully lubricated inner housing liner reduces friction and enhances lever feel - Stainless steel low friction inner cable - Compatible with all cable-actuated mountain bike brake systems Includes: 6 x Open End Cap, Alloy/Black 3 x Cable Oring, Translucent (1 set = 3pcs) 2 x Frame Protector, Mini Black 2 x Cable Tip, 1.8mm, Alloy/Silver

- Teflon-coated stainless steel inner wire - Includes cable, housing, ferrules, and cable tips - Cable length: 2100mm - Housing length: 1800mm - Use: Front or Rear - Length: 2100mm - Diameter: 1.5mm - Style: BMX/MTB

- BMX brake cable kits for front or rear application - 1.5mm galvanized inner slick cable - Cable length: 1700mm / 67-inches - Housing length: 1750mm / 69-inches

- Shop dispenser of aluminum cable end caps to prevent cable fray - 500 pieces - 1.6mm

- Housing features the Jet Lube Process, which injects the proper amount of grease from end to end and results in 10 percent less cable drag - Lead and Dioxin free. - 30m - Made in Japan

- Shop dispenser of cable end ferrules - 100 ferrules per bottle - For use with 4mm housing

- Shop dispenser of cable end ferrules - Chrome color - 100 ferrules per bottle

- All Yokozuna cables have high-grade raw materials flexibility strength tight construction and excellent quality control - Premium stainless steel for greater durability - Standard cables are high-strength die-drawn steel cables with proprietary Sn50 pl - 1700mm

- All Yokozuna cables have high-grade raw materials, flexibility, strength, tight construction, and excellent quality control - Premium stainless steel for greater durability - Standard cables are high-strength die-drawn steel cables with proprietary Sn50 plating that exhibits corrosion resistance superior to a zinc galvanized cable - Made in Japan - 1700mm

Premium quality aluminum cable end crimps to prevent cable fray. Made in Japan

Two-piece threaded cable tip contains the cable end without crushing it. CNC aluminum, no tools needed to install, reusable.

Housing features the Jet Lube Process, which injects the proper amount of grease from end to end and results in 10 percent less cable drag. - Lead and Dioxin free - Made in Japan

- Housing features the Jet Lube Process, which injects the proper amount of grease from end to end and results in 10 percent less cable drag - Premium stainless steel for greater durability - Lead and Dioxin free. Made in Japan

- All Yokozuna cables have high-grade raw materials, flexibility, strength, tight construction and excellent quality control - Stainless: high-quality die-drawn stainless steel cable - Standard: Sn50/tin-plated - Made in Japan - Length: 1700mm - Diameter: 1.6mm - 100 cables per box