Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts & Accessories

45NRTH Replacement Pedal Pins
$20.00
45NRTH's Replacement Pedal Pins are a great way to customize the style and grip of your 45NRTH pedals (sold separately). These tough, aluminum pins deliver fantastic bite into traditional winter boots, and come in a variety of colors to coordinate with your rig. Plus, the included wrench keeps the job quick. - Includes: 32 pins and wrench
All-City Classic Plastic Double Toe Clips
$16.00
- Nylon construction - Intended for use with double-strap toe straps (sold separately) - Includes mounting hardware - 36 grams per pair
All-City Swan Road Double Toe Clips
$25.00
- Steel - Intended for use with double-strap toe straps (sold separately) - Classic road toe clip profile - Includes mounting hardware - 36 grams per pair
All-City Crayton Double Toe Clips
$30.00
- Steel - Intended for use with double-strap toe straps (sold separately) - Includes mounting hardware - 50 grams per pair
Crank Brothers Highline Sticker Kit
$7.99
Pre-cut traction tabs designed to integrate with the Highline remote lever and increase grip for ultimate control.
Crank Brothers Candy 2/3 Traction Pads - 2017+
$9.99
Polyurethane pads with diamond plate traction pattern allow riders to customize their pedals for a perfect interface with any shoe. - Kit includes eight 1mm traction pads and eight 2mm traction pads
Crank Brothers Tread Contact Sleeves
$9.99
Crank Brothers' Tread Contact Sleeves shim the area between the pedal and your shoes' tread so there is no rocking or play when you're clipped in. They provide a solid platform to put down all your power! They work with either your Eggbeaters or Candy pedals, and each includes 1mm, 2mm, and 3mm shims.
Crank Brothers 5050 Pin Kit
$11.99
Crank Brothers' 5050 Pin Kit includes fifty 8mm-long steel pins that let you customize the traction on your 5050 or Mallet pedals. Thread lock is pre-applied to every pin.
Crank Brothers Shoe Shields
$11.99
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes. - Sold in pairs
Crank Brothers Traction Pads for Candy 7/11
$14.99
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer. The kit includes: - 8 × 1mm traction pads - 8 × 2mm traction pads Compatible with: - Candy 7 & 11 - Model years 2016 – present
Crank Brothers Traction Pads for Mallet E
$14.99
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer. The kit includes: - 8 × 1mm traction pads - 8 × 2mm traction pads Compatible with: - Mallet E - Model years 2016 – present
Crank Brothers Pedal Refresh Kit
$24.99
Your pedals like to be pampered. The Crank Brothers Pedal Refresh Kit gives you everything you need to keep them happy. Pedal Refresh Kit includes: -Enduro catridge bearings - Igus LL-glide bearings - Double seal system (internal and external seals) - Hex alloy end caps - O-rings - Nuts - Sleeve bushings - Bearing removal tool Compatible with the following pedals (2010-present): - Eggbeaters - Candys - Mallets - 5050s
Crank Brothers Pedal Refresh Kit - Doubleshot
$24.99
A revolution in performance and reliability. - The kit includes premium internal components: - Inner spindle seal x 2 - Outer spindle seal x 2 - Inner Igus solid bearing x 2 - Outer Enduro cartridge bearing x 2 - Spindle nut x 2 - Outer bearing carrier x 2 - Compatibility: Doubleshot (2016), Doubleshot 2 (2017+), Soubleshot 3 (2017+)
Crank Brothers Pedal Refresh Kit - Eggbeater 11/Candy 11
$24.99
A revolution in performance and reliability. The kit includes premium internal components: - Enduro catridge bearings - Enduro sealed needle bearing - Double seal system (internal and external seals) - Hex alloy end caps - O-rings, nuts - Sleeve bushings - Bearing removal tool
Crank Brothers Pedal Refresh Kit - Stamp
$24.99
A revolution in performance and reliability. The kit includes premium internal components: - Inner bearing o-ring x 2 - Spindle seal x 2 - Outer Igus solid bearing x 2 - Inner Igus solid bearing half x 4 - Bearing Retainer Bolt x 4 - Outer o-ring x 2 - Grease port screw x 2 - Compatibility: Stamp (2016), Stamp 7 (2017+), Stamp 11 (2017+)
Crank Brothers Easy Release Cleat Kit
$26.99
Cleats with a more forgiving 10-deg release. - Optimized for novice riders or those new to clip-in pedals - 10-deg release angle makes it easier to unclip - 2-hole bolt pattern for mountain bike shoes - Plastic spacing shims included - Compatible with all Crankbrothers clip-in pedals
Crank Brothers Premium MTB Cleats
$26.99
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability. - SPD compatibility - Weight (pair): 30g - Float: 6 degrees - Release angle: 15 or 20 degrees
Crank Brothers Zero Float Cleats
$26.99
Crank Brothers' Zero Float Cleats offer no pedal float for greater pedaling efficiency. They're made from solid brass for crisp entry and exit, and top-notch durability. - Weight (pair): 30 grams - Shoe compatibility: SPD - Release angle: 15 degrees
Crank Brothers Long Spindle Kit
$49.99
Widen your Q-factor to 57mm. - Long spindles are 5mm longer than standard. - The kit includes: 1 pair long spindles + refresh kit (Enduro cartridge bearings, igus ll-glide bearings, DSS double seal system: internal and external seals, hex alloy end caps, o-rings, nuts, sleeve bushings, & bearing removal tool). - Compatible with: Eggbeater, Candy, Mallet, 5050, Double shot, model years 2010-present - Weight: 112g per pair - Spindle material: forged SCM 435 chromoly steel - Q-factor: 57mm
Crank Brothers Titanium Spindle Kit
$150.00
The ultimate weight-saving upgrade.  - The kit includes: 1 pair titanium spindles + refresh kit (Enduro cartridge bearings, Igus ll-glide bearings, DSS double seal system: internal and external seals, hex alloy end caps, o-rings, nuts, sleeve bushings, & bearing removal tool). - Compatible with: Eggbeater, Candy, Mallet, 5050, Double Shot, model years 2010-present - Weight: 60g per pair - Spindle material: 6al/4v titanium - Max. rider weight: 200lb/90kg - Q-factor: 52 mm
Delta Strapless Toe Clips
$12.99
- Molded from durable nylon material - Includes mounting hardware - One size, no straps required - Easy installation
Delta Foot Fenders
$14.99
- Strapless design is easy to engage without fully committing to the pedal - No special shoes required - Improves pedaling efficiency - Molded from unbreakable nylon - Please make sure your pedals have visible mounting points or a removable reflector for mounting prior to purchase - Includes mounting hardware. Note: metal plate may not be required during installation.
Ergon TP1 Pedal Cleat Tool
$24.95
The Ergon TP1 Pedal Cleat Tool is the first tool for precisely and easily adjusting cycling shoes cleats. The ergonomically correct position of the feet on the pedals plays a crucial role in injury prevention and is also important for maximizing both performance and comfort.
Exustar E-CK2B Cleat Covers
$10.89
Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers. - Compatible with Exustar cleat C01, C03, and C05 - Durable and flexible rubber - Can be used with either floating or fixed position cleats - Weight of only 14 grams/pair
Exustar E-CK1B Cleat Covers
$12.79
Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers. - Compatible with Look Keo System - Durable and flexible rubber - Can be used with either floating or fixed position cleats - Weight of only 45 grams/pair
Exustar E-BSL11 Cleat Set
$15.99
- Shimano SPD-SL-style - Engineered thermoplastic injection body - Anti-slip walk pads - Fixed position with no float
Exustar E-RSL11 Cleat Set
$15.99
- Shimano SPD-SL-style - Engineered thermoplastic injection body - Weight of 24 grams per cleat - 4.5-degree floating arc
Giant Giant Toe Straps
$7.25
Giant's Giant Toe Straps are made of durable nylon with chrome-plated steel buckles. The ends of the buckles are rubber-tipped to be easy on your fingers when you're adjusting the strap tension on rides.
Giant AC Toe Clips and Straps Set
$14.00
Giant's AC Toe Clips and Straps includes two durable chrome-plated steel clips, mounting hardware and a pair of quality leather straps with chrome-plated steel buckles.
Look Keo Cleat Covers
$15.00
The Keo Cover protects your cleats while walking. They are compatible with all Keo Grip cleats and Keo Cleats. – Cleats protection – Anti-slip – Compatible with all cleats
Page 1 of 3 Next page