Bottles/Cages

The Ultimate Drink Holder! ABC – ANY BOTTLE CAGE! Fits almost any bottle, cup, or container 2 1/4" to 4 3/4". Turn knob to tighten and turn to loosen. Crank it down so drink won't come out or set to desired interference fit for easy in or easy out. - Handlebar, frame, and seat post adapters available.

Features - Alloy bottle cage - 6mm alloy rod - Tough and still flexible - Compatible with various water bottles

Having trouble getting your bottle out of your cage? Upgrade to XLAB's Sidekick Carbon Cage! It's specifically designed for use with aero frames, tri bikes and other rigs with small front triangles. Plus, its side-loading design lets you slip your bottle in and out at a comfortable angle so you won't have to struggle with a stuck bottle ever again. It's also crafted from carbon for an impressive weight of only 34 grams. And, it boasts a whopping five pounds of grip force so it keeps bottles in place over even the roughest pavement. - Ideal for fastest frame bottle access and for small frames - Low cut sides for rapid bottle removal and insertion - Wide center opening permits sides to flex outwards for easy bottle withdraw - Special flared entry lip for fast bottle access and insertion - Long thick lower shelf prevents large heavy bottles falling through cage bottom or breaking off tab - Matches XLAB Gorilla cages rear carrier Anti-Launch, and Chimp cages

This stainless steel, insulated iteration of the well-loved Podium bottle keeps your hydration cold without holding you back. Keep your chill Tough enough to tackle any ride, the Podium® Steel is built for life on and off the road. Made from premium 18/8 stainless steel, this sleek bottle combines rugged durability with a streamlined design that's always close at hand but stays out of your way. The double-wall vacuum insulation keeps your beverages cold for your entire ride, and the lightweight construction strikes the perfect balance between agility and reliability. Product details: - Made with safer chemicals, designed to preserve resources and diminish disposables - Double-Wall Vacuum Insulation - Temperature defying chill - Lightweight Design - So lightweight you might forget it's there - Hours Cold - 18 hours - No Squeeze Required - Just grab, lift, and sip - 18/8 Stainless Steel - Tough as nails, but doesn't taste like them - High-Flow Cap - Logic-defying sipping ease - Leakproof Lockout - No spills, all thrills Features: Easy Drinking Stay focused on crushing your ride – not your bottle. Podium's high-flow cap means there's no squeezing necessary to get maximum hydration. Just grab, lift, and sip! Tired of plastic? Ditch your plastic water bottles for the CamelBak stainless steel and titanium bottles that are built to stand the test of time. Stainless steel vs. titanium Both bottles will be long-lasting and easy to clean, so which do you choose? Easy! The titanium bottles are lighter weight and the stainless steel bottles offer more durability while keeping your water colder for longer.

Fancy up that bottle cage with a fresh new water bottle from Whisky Parts Co. This insulated 23-oz. bottle with a MoFlo cap makes instant refreshment possible! - Insulated for temperature optimization - Purist technology shields the inside of the bottle from any bad taste, mold, or staining - Squeezable materials allow for unmatched flexibility and comfort

- Side loading design makes it easy to insert and extract bottles from the side - Low profile design improves compatibility on small/compact frames - Slotted holes for adjustable mounting - Made of composite matrix material

High-performance cage at a low price point! Large area bottom hook supports large bottles with Side cutouts to enable fast bottle withdraw and entry. High-performance cage at a low price point! - Large area bottom hook supports large bottles - Extra sturdy high resistance techno polymer design - Made in Italy with the finest Italian quality - Pair with the hyper-reflective Cool Shot insulated bottle (sold separately) Grip Force - Approx 4lbs grip force Ideal Uses - Road - Triathlon (Aerobar and Frame)

Origin-8's Flask Cage is the cage you need to carry your Origin-8 Flask (sold separately). It's made of durable and light aluminum to hold your Flask securely and keep it right at hand.

XLAB's Gorilla Carbon Cage is one of the most popular rear bottle cages on the market! It boasts an amazing 7-pound grip force to keep bottles in place on bumpy roads and it's been specifically tweaked to work perfectly with saddle-mounted cage carriers. The Gorilla has over two times the gripping force of conventional carbon cages thanks to its 6 carbon gripping fingers, its top and bottom retention tabs and thicker carbon construction. And, it's still easy to slide your bottle out and grab a drink even when you're pushing it to the limit.

XLAB's Mini Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 500ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.

Contains all of the essential spare parts to freshen your Torpedo. - Includes: 2 Refill Lids, 2 Straw Plugs (Clear Solid and Black Slotted), Straw with Drink Valve and Dolphin Tail Screw.

Using the same technology of the SlideCage but for front bottle insertion and featuring a bottle size adjustment nose the Topcage delivers great performance and fits to all plastic drinking bottles.

- Rigid alloy construction - Weighs only 65.2 grams

Innovative design with side and bottle insertion/removal - Carbon injection bottle cage - Extremely light, 25 grams - Compatible with all frames, ideal for sloping tubes or small sizes

This 18-gram water bottle cage is nearly as light as air. The cold forged, single body aluminum construction grabs hold of your water bottle until you need to wet your whistle. Its handsome and streamlined design will complement any bike. - Cold forged, single body aluminum construction - Tapered arms for easy water bottle access - Bolt-on mounting - Weight: 18 grams

- .75L SKS water bottle - Made in Netherlands

- Constructed using a 6mm aluminum rod - Embossed MSW logo

Planet Bike's Sideload Cage is perfect for smaller frames and compact geometry. This cold-forged aluminum cage loads from the right on downtubes and the left on seat tubes. And, it's only 41 grams!

The Delta 425 is among the lightest and stiffest, adjustable single rear bottle carriers on the market. Compatible with ISM saddles. The Delta 425 mounts to the saddle rails and hides in the body's draft. Angle and height are highly customizable for that perfect fit. It includes a tight-gripping Gorilla XT carbon fiber cage for a secure hold.

- Self-adjusting elastomer to improve bottle retention - Made with high-impact composite material

The Portland Design Works Sparrow Cage is made from a single sheet of lightweight 5052 alloy. The Sparrow's wings fold in to securely cradle your water bottle and the cut outs help keep the cage light. Get a Sparrow and make your ride fly. - Constructed of 5052 alloy - Includes two stainless bolts for installation  - Weight: 57g (2oz) - Lifetime PDWarranty

This rear-mounted hydration system holds two bottles and attaches directly in front of seatpost for easy hydration on the go. - Full angular adjustment allows bottles to be rotated - 6061-T6 aluminum construction - Brackets included to mount two Co2 cartridges - Fits 31.6mm to 27.2mm seatpost with shims (included) - Includes two cages and 6061-T6 Aluminum clamp and extension

MSW's Aluminum Water Bottle Cage is a lightweight, tough addition to your ride. The one-piece construction ensures durability over the long haul, and at only 35 grams, you won't even notice it's there.

MSW's PC-110 Water Bottle Cage secures your bottle while keeping weight to a minimum. The lightweight plastic is durable, and easily secures your bottle.

XLAB's Chimp Carbon Cage weighs only 36 grams and firmly holds your bottles in place, even over bumpy terrain thanks to 5 pounds of gripping force. It's specifically designed for use with tri bikes and other aero rigs with smaller front triangles that make grabbing bottles from ordinary cages difficult. The Chimp Cage's 30-degree cutoff lets you pull your bottles out at an angle for improved ease of use. Plus, this light carbon cage grips great and has supportive top and bottom tabs so you'll never lose a bottle.

This super cute tiki bicycle drink holder fits most bike handlebars. Features bamboo siding and floral lei that will be a perfect addition to your bike or beach cruiser. - Give your ride your own personal flair while having a great drink holder - Can hold wallet, phone, keys, sunglasses as well as your favorite beverage - Easy to install on your handlebars with one screw - Cute artificial flowers adorn the top

Add sparkling personality to your ride with these bling drink holders! - Give your ride your own personal flair while having a great drink holder - Can hold wallet, phone, keys, sunglasses as well as your favorite beverage - Easy to install on your handlebars with one screw - Many varieties available

Sometimes you don't want to leave your cup of joe at home. Enter: Origin-8's Joe-2-Go Drink Holder to keep your morning beverage within easy reach.

Lezyne's Flow Cage is made from a fiber reinforced Composite Matrix material for low weight, strength, and reliability. Its X-Grip design holds bottles securely over the rough stuff and allows for easy in/out.

Profile Design's Aero HC Bottle features an aerodynamic design so you can stay hydrated without sacrificing your position or speed. A flip up cap means easy refilling on the go, and the removable nose makes it easy to clean the bottle after the ride. The straw shroud is aero as well, so nothing about this exceptional piece of kit will hold you back in your quest against the clock.