Rims

The rim for high-impact riding. The BA30 is a quality alloy rim designed to withstand a real beating. This is the rim for high-impact riding when the trails are rough and rugged. With an internal bracing structure, the BA30 has torsional stiffness for directional control in demanding circumstances. The BA30 features a thick bead wall adjacent to the tire to resist impact deformation, with a wider, rounded top-edge to reduce sidewall cuts. The nipple/spoke bed is oriented to the spoke direction to reduce weakness caused by bend in the spoke at the nipple hole. The BA30 is made with premium alloy, extruded with an internal brace profile and carefully formed for consistent shape. It is then fusion welded and ground for a strong precise finish. Our fusion welding system leaves a perfect seamless joint that becomes the strongest section of the rim ensuring that your rim won’t split if you impact at the seam. - Premium extruded alloy - Fusion welded seam-ground finish - Internal bracing profile - Impact resistant design - Tubeless Ready - 27.5: 570g - 29: 610g - 27.5" ERD: 566mm - 29" ERD: 604mm

Lighter format / all mountain / trail riding The PHASE30 mirrors Chromag's BA30 profile but in a lighter format that suits all-mountain and trail riding conditions. This is a high-quality alloy rim that is tougher than most with added protection at the bead-walls for impact resistance and reduced sidewall cuts. The nipple/spoke bed is oriented to the spoke direction to reduce weakness caused by bend in the spoke at the nipple hole. The PHASE30 is made with premium alloy, extruded and carefully formed for consistent shape. It is then fusion welded and ground for a strong precise finish. Chromag's fusion welding system leaves a perfect seamless joint that becomes the strongest section of the rim ensuring that your rim won’t split at the seam if you have an impact there. - Premium extruded alloy - Fusion welded seam-ground finish - Internal bracing profile - Impact resistant design - Tubeless Ready - ERD: 566mm - Tire sold separately

Plus Sized Rims for Plus Sized Tires The Magna is specifically made for plus tires in the 2.8-3.0” range. With a 40mm internal width, the Magna 40 is designed to suit wider plus tires between 2.8" and 3.0”. The Magna 40 features a thick bead wall adjacent to the tire to resist impact deformation, with a wider, rounded top-edge to reduce sidewall cuts. The nipple/spoke bed is oriented to the spoke direction to reduce weakness caused by bend in the spoke at the nipple hole. The Magna is made with premium alloy, extruded and carefully formed for consistent shape. It is then fusion welded and ground for a strong precise finish. Our fusion welding system leaves a perfect seamless joint that becomes the strongest section of the rim ensuring that your rim won’t split if you impact at the seam. - Premium extruded alloy - Fusion welded seam-ground finish - Impact resistant design - Tubeless Ready

- Braking surface: Disc - Rim weight: 445g - Finish: Black Anodize/Vinyl Decals - Type: Tubeless-ready clincher - Rim material: EA90 aluminum/welded - Rim depth: 27mm - Internal rim width: 19.5mm - External rim width: 24mm - Spoke holes: 28; 32 - ERD: 580 - Max tension: 1200 N/122 KGF

- Braking surface: Machined aluminum - Rim weight: 455g - Finish: Black Anodize/Vinyl Decals - Type: Tubeless-ready clincher - Rim material: EA90 aluminum/welded - Rim depth: 27mm - Internal rim width: 19.5mm - External rim width: 24mm - Spoke holes: 24, 28, 32 - ERD: 580 - Max tension: 1200 N/122 KGF

Someone said a few years ago that there was nothing new left to do with BMX rims, yet since then GSport has gone on to do quite a lot of new stuff, and here’s an example of the latest. At first glance the Birdcage looks like a fairly conventional “aero” style rim, but there is more to it than that. The first clue comes from the name; birds have hollow bones to save weight whilst retaining as much strength as possible, and the Birdcage rim has a hollow bead for the same reason. The rim’s hollow bead is still big and chunky to help reduce the chances of pinch puncturing or flat spotting the rim, but by creating a tiny hollow cavity inside it GSport can also keep the weight right down. The next innovation was to adapt their cross-lacing design to the narrow inner wall of the rim. They managed to squeeze a few extra millimeters of spoke offset out of the design to help increase lateral wheel strength, and by carefully tailoring the rim’s cross-section we managed to match all the angles to the nipple so that the walls of the rim section act like the ribs inside the Ribcage rim, which helps to support the spoke nipples as much as possible. Traditionally, the greatest flaw in “aero” rims has been the valve hole. “Aero” rims position a lot of very efficiently utilized mass in the base of the rim to support the spokes and give the rim good strength, then a huge hole is drilled through it for the valve stem and a massive weak-spot is created. With the Birdcage GSport has offset the valve hole so that this section can retain its strength. A handy side-effect of this is that fitting a pump is now more convenient. Aside from these original features, GSport spent a lot of time “sweating the small stuff”. They’ve ensured that the deep center allows for easy tire removal and fitting, and they've made sure that the sidewalls, while slimmed down, are still suitable for brake use. The end result is one of their most high tech rims to date. With a weight of just 408g (14.4oz) it outperforms most rims weighing 20-30% more, and the weight saving from the rotational mass of the wheel feels fantastic. TECHNICAL SPECIFICATIONS - Sizes: 20" Only - Drillings: 36 hole - Weight: 408g / 14.4oz - Width: 34mm ERD: 383mm

If the Ribcage is too rich for your blood, the Rollcage is its more affordable sibling. Using the same proven shape and cross-over-lacing to create a really strong wheel, but industry standard 6061-T6 alloy and no ribs drops the price considerably. While the Rollcage is the lesser expensive, it is still an excellent rim, with the same super tough sidewall and bead profile its the lightest rim we make at 450 grams. You will recognize the rims by their outer shape, but the Rollcage is actually 2mm narrower and easily identified by the groove in the middle of the inner wall. We offer rims in HARD anodized finishes rather than the decorative anodizing used by most companies. TECHNICAL SPECIFICATIONS - Sizes: 20" Only - Drillings: 36 and 48 - Weight (Hard Anodised): 450g / 15.9oz - Weight (Chrome Plate): 490g / 17.3oz - Width: 34mm ERD: 389mm

The Ribcage has been one of the only rims to have true design breakthroughs in the last few years, since its introduction the competition has scrambled to catch up but still remain a poor copy, so if it doesnt say G-Sport on the rim, don't expect it to perform like a G-Sport rim. The Ribcage is a light weight rim that can take anything you throw at it. With the ribcage the spoke holes are re-enforced with patented ribs that support the sides of each spoke nipple and eliminate the possibility of nipple pull through under even the highest loads. The rim also features cross-over-spoke lacing, where each spoke goes from one side of the hub to the opposite side of the rim for an increased angle and therefore increased lateral strength. The outer walls are extra thick to protect against case dents, while the other walls are extra thin to keep it light. The entire design revolves around the use of a proprietary high strength aluminum alloy made specially for us in an on-site foundry . At 500 grams, the strength to weight ratio of the Ribcage cannot be matched. The 36mm width and 18mm height are also major factors in the design, spreading out the impacts and maximizing resistance to pinch puncturing. GSport offers rims in HARD anodized finishes rather than the decorative anodizing used by most companies. All of these advantages create the premier rim, but do effect the cost. TECHNICAL SPECIFICATIONS - Sizes: 20" Only - Drillings: 36 and 48 - Weight (Hard Anodised): 500g /17.6oz - Weight (Chrome Plate): 540g / 19oz - Width: 36mm ERD: 389

The QUADRANT uses a unique pinned junction design that allows Odyssey's lightest rim to also be their most affordable. With its offset spoke drilling, this rim is stronger than its weight suggests. The Quadrant is one of the few pinned rims that receives regular and unquestioned use by pro level riders. SPECS - 6000 series aluminum - Width: 34mm - Height: 18mm - ERD: 392mm - 36-H - 20 inches - 420 grams (14.8 oz)

The Odyssey Litehouse Rim is both light and strong, with super-thick angled sidewalls to minimize the risk of damage when you hang up. The rim features a wider cross-section than normal to compliment modern tire widths. Designed as a semi-brakeless rim that can be run front or rear. When brakes are used, be sure to adjust the pads so they avoid making contact with the tire’s sidewall, as usual. Features: - Precision welded joint - 6000 series aluminum Specs: - Width: 35mm - Height: 21mm - ERD: 388mm - Weight: 475 grams (16oz)

A long running standard, the Hazard Lite is revered because of its strength, lightweight and affordable price. Constantly imitated but never matched in quality or reliability, the Hazard Lite is used regularly by pro-level riders–even the ones that are being paid to ride something else. SPECS - 6000 series aluminum - 32mm wide - 17mm tall 36H - 20-inch version (ERD: 390mm) - 24? version (ERD: 486mm)

The original 7000 series aluminum BMX rim. This specialty grade of aluminum lets Odyssey produce a rim that is both lightweight and strong. The Seven-KA is a proven, go-to rim for pro-level riders worldwide. SPECS - 7000 series aluminum - Width: 34mm - Height: 17mm ERD: 390mm

Origin-8's Track Attack Rims are 42mm-deep and made of light and durable aluminum sleeved and pinned for strength.

Origin-8's DNZ18 is a lightweight 700 x 22c aero aluminum clincher rim. It has machined sidewalls for great braking and the spoke holes are reinforced with eyelets for durability.

- 42mm DEEP DISH sleeved and pinned rim - Powder coated (PC) or Anodized finish(Ano) dependent on color - Available with Machined or Non-Machined sidewall - 760g

- AL6061-T6 alloy construction - Post-production anodized in a sanded gloss black finish - Available in 2 profile options - Tubeless ready - Disc brake only - Sleeved joint - ISO-Road certified Specs: - ISO: 622 - Wall: Dbl - Side: Disc - Valve: Pv - Tire Compatibility: Tubeless Compatible High Profile: - Width ID: 19 - Width OD: 22.6 - Profile: 30 - Weight: 400g - ERD: 577 Low Profile: - Width ID: 17 - Width OD: 22.3 - Profile: 22 - Weight: 410 - ERD: 594

- AL6061-T6 alloy construction - Post-production anodized in a sanded gloss black finish - Available in 2 profile options - Tubeless ready - Disc brake only - Sleeved joint - ISO-Road certified - ISO: 622 - Wall: Dbl - Side: Disc - Valve: PV - Tire Compatibility: Tubeless Compatible High Profile: - Width ID: 19 - Width OD: 22.6 - Profile: 30 - Weight: 400g - ERD: 577 Low Profile: - Width ID: 19 - Width OD: 22.6 - Profile: 30 - Weight: 410g - ERD: 594

- AL6061-T6 alloy construction - Post-production anodized in a sanded gloss black finish - Available in 2 profile options - Tubeless ready - Sleeved joint - ISO-Road certified - ISO: 622 - Width ID: 17 - Width OD: 22 - Wall: Dbl - Side: MSW - Valve: PV - Tire Compatibility: Tubeless Compatible High Profile: - Profile: 35 - Weight: 550g - ERD: 568 Low Profile: - Profile: 24 - Weight: 435g - ERD: 589

- AL6061-T6 alloy construction - Post-production anodized in a sanded gloss black finish - Eyeletted spoke holes - Tubeless ready - Disc brake only - Sleeved joint - ISO-Mountain certified - ISO: 584 - Width ID: 27 - Width OD: 32.2 - Profile: 20 - Wall: Dbl - Side: Disc - Valve: PV - Weight: 490g - ERD: 559 - Tire Compatibility: Tubeless Compatible

- AL6061-T6 alloy construction - Post-production anodized in a sanded gloss black finish - Eyeletted spoke holes - Tubeless ready - Disc brake only - Sleeved joint - ISO-Mountain certified - ISO: 584 - Width ID: 23 - Width OD: 28.4 - Profile: 18 - Wall: Dbl - Side: Disc - Valve: PV - Weight: 440g - ERD: 563 - Tire Compatibility: Tubeless Compatible

- AL6061-T6 alloy construction - Post-production anodized in a sanded gloss black finish - Eyeletted spoke holes - Tubeless ready - Disc brake only - Sleeved joint - ISO-Mountain certified - ISO: 622 - Width ID: 23 - Width OD: 28.4 - Profile: 18 - Wall: Dbl - Side: Disc - Valve: PV - Weight: 465g - ERD: 601 - Tire Compatibility: Tubeless Compatible

- AL6061-T6 alloy constuction - Post-production anodized in a sanded gloss black finish - Tubeless ready - Disc brake only - Pinned joint - ISO-Mountain certified - ISO: 584 - Profile: 18 - Wall: Dbl - Side: Disc - Valve: PV - ERD: 564 - Tire Compatibility: Tubeless Compatible 40mm Width: - Width ID: 35 - Width OD: 40 - Weight: 560g 45mm Width: - Width ID: 40 - Width OD: 45 - Weight: 650g 50mm Width: - Width ID: 45 - Width OD: 50 - Weight: 730g

- AL6061-T6 alloy construction - Post-production anodized in a sanded gloss black finish - Tubeless ready - Disc brake only - Pinned joint - ISO-Mountain certified - ISO: 622 - Profile: 18 - Wall: Dbl - Side: Disc - Valve: PV - ERD: 602 - Tire Compatibility: Tubeless Compatible 40mm Width: - Width ID: 35 - Width OD: 40 - Weight: 600g 45mm Width: - Width ID: 40 - Width OD: 45 - Weight: 695g 50mm Width: - Width ID: 45 - Width OD: 50 - Weight: 738g

• Size: 26 x 4.0 • ISO: 559 • Double Wall Construction • Non-machined Side Wall • Color: Black • Drill: 36 • Weight: 1,579 grams • Width: 100mm • Rim depth: 29.5mm

• Size: 26 x 4.0 • Double wall construction • Non-machined sidewall • Color: Black • Drilling: 32 or 36 • Width: 65mm • Depth: 21mm

• Size: 26 x 4.0 • Double wall construction • Non-machined sidewall • Color: Black • Drilling: 32 or 36 • ERD: 534 • Width: 80mm • Depth: 24.5 • Weight: 1,310 grams (32-hole), 1,294 grams (36-hole)

- AL6061-T6 alloy construction - Post-production anodized in a sanded gloss black finish - Tubeless ready - Disc brake only - Sleeved joint - ISO-Mountain certified - ISO: 622 - Width ID: 21 - Width OD: 24.6 - Profile: 30 - Wall: Dbl - Side: Disc - Valve: Pv - Weight: 460g - ERD: 577 - Tire Compatibility: Tubeless Compatible

- AL6061-T6 alloy construction - Post-production anodized in a sanded gloss black finish - Eyeletted spoke holes - Tubeless ready - Disc brake only - Sleeved joint - ISO-Mountain certified - ISO: 622 - Width ID: 27 - Width OD: 32.2 - Profile: 20 - Wall: Dbl - Side: Disc - Valve: PV - Weight: 520g - ERD: 597 - Tire Compatibility: Tubeless Compatible

- AL6061-T6 alloy construction - Post-production anodized in a sanded gloss black finish - Eyeletted spoke holes - Tubeless ready - Disc brake only - Sleeved joint - ISO-Mountain certified - ISO: 584 - Width ID: 30 - Width OD: 35.5 - Profile: 20 - Wall: Dbl - Side: Disc - Valve: PV - Weight: 530g - ERD: 559 - Tire Compatibility: Tubeless Compatible

- Model: AT-PRO801-UL - ISO: 559 - Width ID: 74 - Width OD: 80 - Profile: 23.5 - Wall: Sgl - Side: NMSW - Valve: PV - Weight: 1078g - ERD: 536 - Tire Compatibility: Tube Only