Packs/Racks/Baskets

A waterproof, dry-bag-inspired / urban-inspired pannier set that overcomes limitations normally found with waterproof bags. - OCEANWEAVE 600D reclaimed fishnet polyester with waterproof polyurethane coating. - HYDRACORE liner provides an exceptional IPX5 waterproof rating. - Rixen & Kaul VARIO 2 spring-loaded hooks immediately adjust from 6mm-16mm, without any need for tools. - Rixen & Kaul lower SLIDE-LOCK and FLIP-LOCK hold panniers firmly in place. - Triple webbing tie-downs allow variable size/shape loads to be carried outside of the main cavity. Ideal for attaching U-locks. - Intuitive waterproof roll-down closure system. - Ultra-visible three-way 3M triangle logos. - Ultra-stiff Polypropylene backing plate. - Front and rear light clips. - Carry handles. - D-Rings built in to hook attachment points for additional luggage tie-down, or for attaching your own shoulder strap. - Volume 45.2L / 2755 cu/in (pair) (22.6L / 1378 cu/in each bag) - Weight 1530g / 3.37 lbs (pair) - (765g / 1.69 lbs each bag) - Dimensions 43x30x17.5cm / 16.9-inches x11.8-inches x6.9-inches (each bag)

A full-featured, waterproof urban-inspired pannier that overcomes limitations normally found with waterproof bags. Offers exceptional external load flexibility, removeable internal organizers for digital devices, and a convenient external access pocket for keys and/or phone. - OCEANWEAVE 600D reclaimed fishnet polyester with waterproof polyurethane coating. - HYDRACORE liner provides an exceptional IPX5 waterproof rating. - Rixen & Kaul VARIO 2 spring-loaded hooks immediately adjust from 6mm-16mm, without any need for tools. - Rixen & Kaul lower SLIDE-LOCK and FLIP-LOCK hold panniers firmly in place. - Intuitive waterproof roll-down closure system. - Waterproof outer pocket. - Removeable 14.2-inches x10.2-inches padded laptop/electronics sleeve/organizer. - Removeable 10-inches x8-inches padded tablet/electronics sleeve/organizer. - External zippered pocket for keys/wallet, etc... - Keychain clips + 2 x Axiom keychains. - Independent main compartment and outer compartment compression/cargo straps provide exceptional load control. - Outer straps allow gear to be carried outside of the main cavity. Ideal for unplanned loads faced by commuters. - Strap control loops to protect against strap damage if straps are not secured. - Dual daisy-chain tie-down strips for additional load attachment. - Ultra-visible three-way 3M triangle logos. - Ultra-stiff Polypropylene backing plate. - Front and rear light clips. - Carry handle. - D-Rings built in to hook attachment points for additional luggage tie-down, or for attaching your own shoulder strap. - Volume 22.6L / 1379 cu/in - Weight 1220g / 2.69 lbs (incl. laptop sleeve and tablet sleeve) – (995g / 2.19 lbs without sleeves) - Dimensions 47x28.5x13.5cm / 18.5-inches x11.3-inches x5.3-inches main compartment 33x18x7.5cm / 13-inches x7-inches x3-inches pocket - Pannier sold individually

A no-nonsense handlebar bag for the everyday commuter. Every Seymour bag is created using Oceanweave – Axiom’s new lightweight and durable fabric made from reclaimed fishnet – to help reduce the amount of harmful plastics in our oceans. CONSTRUCTION - OCEANWEAVE 600D recycled fishnet polyester with waterproof polyurethane coating - Red interior liner improves internal visibility MOUNTING SYSTEM - Lightweight strap & buckle system ADDED BENEFIT - Zippered Main compartment opens towards rider - Zippered internal convenience pocket for keys/phone, etc. - Zippered exterior pocket for additional storage - Includes shoulder strap - Volume 7 L / 427 cu in - Weight 202g / 0.45 lbs

A set of no-nonsense panniers for the everyday commuter. Every Seymour bag is created using Oceanweave – Axiom’s new lightweight and durable fabric made from reclaimed fishnet – to help reduce the amount of harmful plastics in our oceans. - Volume 35 L / 2139 cu in (pair) - Weight 1240g / 2.73 lbs (pair) - OCEANWEAVE 600D recycled fishnet polyester with waterproof polyurethane coating - Red interior liner on back-plate protects contents from scratches and improves internal visibility - Daisy-chain webbing for additional tie-down options - Rixen & Kaul VARIO 1 hooks are adjustable from 6mm-16mm - The Rixen and Kaul lower SLIDE-LOCK rail and FLIP-LOCK hold panniers firmly in place - Drawstring closure helps to manage load - Mesh side pocket with elastic closure - Zippered rear pocket - Mesh front pocket with elastic closure - Daisy-chain webbing loops provide additional tie-down points - 3M triangle rear logo - Ultra-stiff polyurethane backing plate - LED light clip

A highly functional trunk bag with a thermal-lined main compartment. Optimized for use as an insulated lunch bag. Every Seymour bag is created using Oceanweave – Axiom’s new lightweight and durable fabric made from reclaimed fishnet – to help reduce the amount of harmful plastics in our oceans. CONSTRUCTION - OCEANWEAVE 600D recycled fishnet polyester with waterproof polyurethane coating - Washable reflective interior is ideal for carry beverages/food. MOUNTING SYSTEM - Lightweight, universal Velcro attachment system attaches to top of rack ADDED BENEFIT - Insulated main compartment is ideal for beverages/food and helps keep contents cool/warm - Side mesh pockets - Rear zippered pocket - Carry handles for added convenience - Volume 9.0 L / 549 cu in - Weight 414g / 0.91 lbs

A set of no-nonsense panniers for the everyday commuter. Every Seymour bag is created using Oceanweave – Axiom’s new lightweight and durable fabric made from reclaimed fishnet – to help reduce the amount of harmful plastics in our oceans. CONSTRUCTION - OCEANWEAVE 600D recycled fishnet polyester with waterproof polyurethane coating - Red interior liner on back-plate improves internal visibility MOUNTING SYSTEM - Velcro platform mounting straps and bungee hook mount ADDED BENEFIT - Zippered main compartments - Zippered side pockets - 3M triangle rear logos - Ultra-stiff polyurethane backing plate - Incorporated carry-handle - LED light clip - Volume 25 L / 1516 cu in (set) - Weight 830g / 1.83 lbs (set)

Axiom's Smart Bag Touch is a great solution for keeping your keys, wallet, and food in reach. It's crafted from water-resistant, 600-denier polyester so its light and tough, and it has a waterproof, touchscreen-compatible smartphone/GPS sleeve. It also has two side pockets; one with a mesh top to keep its contents visible and another with a solid top for privacy.

Axiom's Streamliner 29er DLX Rack centers loads close to the rear wheel for improved stability and handling on your 29er bike. It's made of reliable and lightweight aluminum, features struts to keep loads from getting close to the rear wheel, and offers ample heel clearance when you're carrying panniers.

Axiom's Streamliner Disc DLX Rack fits on bikes with disc brakes that don't have eyelets. It's made of reliable and light aluminum, features struts to keep loads from getting close to the rear wheel, and offers ample heel clearance when you're carrying panniers.

Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum

Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum

Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum

Zipp's Speed Box 1.0 is designed to mount securely to a bike's top tube to hold nutrition and small items conveniently within reach. Featuring solid-molded EVA construction, water-resistant zippers, and 3-point Velcro attachments, the Speed Box 1.0 is a lightweight, easy-to-use alternative to traditional saddle bags.

Zipp's Speed Box 2.0 is designed to mount securely to a bike's top tube to hold nutrition and small items conveniently within reach. Featuring solid-molded EVA construction, water-resistant zippers, and 3-point Velcro attachments, the Speed Box 2.0 is a lightweight, easy-to-use alternative to traditional saddle bags.

Zipp's Speed Box 3.0 is designed to mount securely to a bike's top tube to hold nutrition and small items conveniently within reach. Featuring solid-molded EVA construction, water-resistant zippers, and 3-point Velcro attachment, the Speed Box 3.0 is a lightweight, easy-to-use alternative to traditional saddle bags.

When race day arrives, the last thing you want to worry about is organization. The Zipp Transition 1 Gear Bag has multiple compartments to keep your essentials easy to find and converts quickly from backpack to duffel with a removable shoulder strap. A top molded pocket protects valuable items like cell phones and sunglasses, while a large ventilated lower compartment keeps shoes or wet clothes separated from the main hold. Camera bag-style dividers, an adjustable helmet pocket, and water-resistant fabric further extend the Transition 1's versatility, providing race-day relief from basic, cluttered alternatives. - Center compartment includes camera bag-style dividers to keep items organized. - Large ventilated lower compartment for shoes or wet clothing. - Adjustable helmet pocket. - EVA top pocket. - Side net for water bottles. - Reflective tabs. - Total volume of 56 liters

Keep small items separate for easy access. With a quick twist, the store-all Duo Pod opens up two waterproof compartments, each ideally sized for keeping both large and small items neatly organized. - Fits in cage - Two waterproof compartments to easily sort items by size. No more mixing nutrition with money or jersey pocket baggies. - Large Chamber: 600mL (20.3 fl oz) fit for repair essentials like a tube, two tire levers, XLAB AirStrike CO2 Cartridges, inflator, tool kit and patch kit. - Small Chamber 83mL (2.8 fl oz): Tucks away smaller items like cash, house keys or salt tablets - Includes rattle-proof microfleece bag to block noise - Deep notch keeps pod secure in cage - Capacity: Upper Compartment Capacity 83mL (2.8 fl oz), Large Chamber 600mL (20.3 fl oz) - Ideal Contents: Cash, House Keys, Salt Tablets, Patch Kit, XLAB Inflator - Lower Compartment Capacity: 600mL (20.3 fl oz) - Ideal Contents: Tube, (2) Tire Levers, 2 XLAB AirStrike CO2 , XLAB Inflator, XLAB Tri Tool Kit, Patch Kit - Weight: 106g (including bag) - Height: 197mm tall - Includes: Pod Container and MIcrofleece Bag - Warranty: 2 Year Limited Warranty

Convenient, state-of-the-art storage case with a stealth carbon-look finish fits securely in cages. Rattle-proof padding for a noiseless ride. Ideal for road-side repair tools. - Capacity: 25.8 cubic inches (423 cubic cm) - Height: 5.25 in (133.5 mm) - Weight: 65g

Xlab's Mezzo Bag is the perfect seat bag for carrying and protecting your spare tubular tire (or 2 tubes), your inflator, and other essential repair items. The bag features a large main compartment and a zip pocket on the outside for easy access. It's made from tough woven nylon. It's easy to install with the hook-and-loop and buckled straps, and it works with both standard and aero seatposts.

Xlab's Mini Bag is a small seat bag perfect for carrying the essentials. Can fit a tube, tire levers, inflator, patch kit, and two 16-gram CO2 cartridges. Small enough to tuck under your saddle or inside your Super Wing or Carbon Wing rear carrier. It's made from tough Cordura, is easily attached with the hook-and-loop straps, and it works with round and aero seatposts.

Square top-tube boxes are not aero, so step in the Rocket Pocket! The streamlined design of the Rocket Pocket eliminates stem drag. The non-slip surface underneath provides sturdy nutrition storage. An easy-slide rubber zipper pull allows for a quick, easy open and close to keep your focus on the road. Silver interior lets you find your nutrition or salt tablets quickly. It can fit the longest energy bars

Square top-tube boxes are not aero, so step in the Rocket Pocket! The streamlined design of the Rocket Pocket XL eliminates stem drag. The non-slip surface underneath provides sturdy nutrition storage. An easy-slide rubber zipper pull allows for a quick, easy open and close to keep your focus on the road. The silver interior lets you find your nutrition or salt tablets quickly. It can fit the longest energy bars.

Airfoil Shape bag large enough to fit phones up to 6.75" (172mm) diagonally. Includes inside pocket for small items. Has extra long front strap, ideal for standard stems. 3.3" high, 46 cu.ins (750cc) capacity. Includes hang tag to promote cell phone usage! Structured, strap mounted bag for standard stems fits cell phones up to 6 3/4" (171.45mm) diagonally and 6-8 gels. - Upgrade to a new, higher capacity top tube bag perfect for handling larger cell phones - Comfortably fits 6-8 gels along with cell phone, or 10 gels without a phone - Keep tablets or used gel wrappers separate in a handy inside pocket - Rubberized bottom keeps the bag in place - Avoid an overheated smartphone on those hot sunny days - bag interior is insulated! - Highly visible, silver colored interior makes it easy to see contents and stay focused on the road Keep Focused on the Road: Smarter Features for Easy-Access Storage - Wide access opening to easily remove and handle cell phone - Inside pocket for tablets, cash or sticky used gel wrappers - Large, easy-pull zipper for ease of access even when race day adrenaline is at its peak - Silver colored interior makes it easy to find contents - One-handed Super-Slide zipper Aerodynamic Design Tucks Right In Behind Stem - Structured shape perfectly optimized to tuck in behind stem and headset spacers without increasing frontal area - Extra long straps ensure security on all styles of bike configurations Contents Stay Cooler - Insulated sides keep your nutrition cooler

The Stealth Pocket 100 is the first in a line of next-generation top-tube bags. It has a 72-degree front that fits tight up against the stem and features an inside mesh pocket for electrolyte/salt tablets. The bag reduces drag caused by the stem and headset spacers (note: measure stem height to height of bag). The silver-colored interior makes it easy to see what’s inside quickly so you can turn your focus back to the road ahead. With a non-slip surface underneath and extra-long front straps, you won’t have trouble attaching it even if you have cables entering your frame behind the headset. And, you’ll be sure that the Stealth Pocket 100 will stay in place so you can get to your nutrition quickly and easily.

Ultra durable outer showcases a ‘carbon-look’, stylish matte finish. Modern material deflects the elements maintaining high resistance to wear, perspiration and electrolyte drinks. The silver-colored interior makes it easy to see what’s inside quickly so you can turn your focus back to the road ahead. Mounts to top tube via stem/top tube straps. - Capacity: 20.4 in3 (334 cm3) - Weight: 2.3 oz (66g)

No more fumbling for salt, electrolyte or Ibuprofen tablets. Stealth Pocket XP debuts four outside pockets for easy access to the small vitals that make the big difference. The silver-colored interior makes it easy to see what’s inside quickly so you can turn your focus back to the road ahead. - Capacity: 20.4 in3 (334 cm3) - Weight: 2.3 oz (67g)

Ultra durable outer showcases a ‘carbon-look’, stylish matte finish. Modern material deflects the elements maintaining high resistance to wear, perspiration and electrolyte drinks. The silver-colored interior makes it easy to see what’s inside quickly so you can turn your focus back to the road ahead. Mounts to top tube with Velcro straps. - Capacity: 23.2 in3 (380 cm3) - Weight: 2.7 oz (76g)

No more fumbling for salt, electrolyte or Ibuprofen tablets. Stealth Pocket XP debuts four outside pockets for easy access to the small vitals that make the big difference. The silver-colored interior makes it easy to see what’s inside quickly so you can turn your focus back to the road ahead. Mounts to top tube with Velcro straps. - Capacity: 23.2 in3 (380 cm3) - Weight: 2.7oz (76g)

Ultra durable outer showcases a ‘carbon-look’, stylish matte finish. Modern material deflects the elements maintaining high resistance to wear, perspiration and electrolyte drinks. The silver-colored interior makes it easy to see what’s inside quickly so you can turn your focus back to the road ahead. Mounts to top tube bosses. - Capacity: 23.2 in3 (380 cm3) - Weight: 2.7oz (76g)

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Long, four-slotted mount allows two, smaller bottles to be mounted in-line - Compatible with triple bottle mounts on forks or frames, use included neoprene pad and zip tie for use with standard bottle cage mounts

The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options. - Mounts to bottle bosses, or to the B-Rad base for additional carrying options - Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches) - Cradle strap is 40mm wide and 350mm long for supporting loads

The B-RAD Dogbone allows for the bottle cage to mounted off center with additional B-RAD accessories, without needing the B-RAD base. Most commonly used for smaller, curved or dual suspension frames where the slotted bases won't fit or are not needed.

B-RAD Bottle Mounts allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back. - Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts (most modern frames) - 6061-T6 aluminum brackets, stainless hardware - Weight (no hardware) – 20g - Maximum load 1700g - Designed to carry two bottles or accessories off of one B-RAD base

B-RAD Half Bottle Mounts allow for cargo customization and cargo optimization. Designed to work in tandem with B-RAD Base, the Half-Bottle Adaptor moves the bottle over about half a bottle radius to make it easier to access. The Accessory strap mounts can be mounted to the other side providing a mounting point for additional items. - Mounts to the B-Rad base mount (not included

The B-RAD pump bag protects your frame pump from water and dirt ensuring it is working when you need it. - Mounts to the B-RAD system or on its own - Dimensions: 12 in x 2.5 in x 2.5 in (30 cm x 6.5 cm x 6.5 cm)

Wolf Tooth B-RAD Tek-Lite Roll-Top Bags offer extra cargo space for carrying riding essentials on your frame. These bags are crafted from the lightweight, water-resistant, and durable Tek-Lite material, and have sealed seams that will protect bag contents from water, dirt, and other road/trail debris. - Bags offer the capacity to carry multi-tools, small hand pump, spare tube, and/or snacks - Can be attached under a saddle, strapped to a frame with silicone-lined straps, in a bottle cage, or onto any B-RAD Base - Slim, streamlined design that will stay out of the way of cranks and pedaling legs

Wolf Tooth B-RAD Tek-Lite Roll-Top Bags offer extra cargo space for carrying riding essentials on your frame. These bags are crafted from the lightweight, water-resistant, and durable Tek-Lite material, and have sealed seams that will protect bag contents from water, dirt, and other road/trail debris. - Bags offer the capacity to carry multi-tools, small hand pump, spare tube, and/or snacks - Can be attached under a saddle, strapped to a frame with silicone-lined straps, in a bottle cage, or onto any B-RAD Base - Slim, streamlined design that will stay out of the way of cranks and pedaling legs

- Includes basket holder - Carrying handle for off bike use - Polyester powder coating - 11.75" x 8" x 9"

One of the best selling items in Wald's entire catalog, this basket set the precedent for quick-release convenience and is perfect for carrying small bags of groceries. - Made in U.S.A. (Maysville, KY) - This Quick Release Baskets comes with a detachable Slip-on Holder for simple installation - Lift the handle to remove the basket and take it with you - Basket locks back in place when returned to the holder - Dimensions: 14 x 9.5 x 9 inches; the basket tapers to 12.25 x x 7 inches - Holder is designed to fit 7/8" handlebar, hooks are 4 1/2" apart - Available in white (133WH) or black (133GB) Powder Coat Finish - Complete basket including the holder weighs 2.4 lbs.

We know you love the 133, 3133, and 157 baskets. But what happens when you want to haul something that isn't overly large, but can really weigh you down? We thought you'd probably bust out a welding torch and tack a couple of legs on the 133 basket. So that's exactly what we did. The 135 is the exact same size as our popular 133 and 3133 baskets with shorter handlebar mounts and legs bolted to the bottom of the basket. Perfect for a couple of two liters, or a six-pack with some chips and salsa to go. - Basket dimensions: 14.5 X 9.5 X 9 inches - Legs match the finish of the basket - Same size as the popular 133 and 3133 baskets with shorter handlebar mounts

The 157's little brother, this basket is just as functional. Some people don't need to cart around large pizzas or multiple full size grocery bags, so this basket is for the more streamlined commuters and delivery pros. Sturdy one-piece legs offer all the support you'll need when hauling heavier loads. - Fits most bikes - Adjustable legs mount to front axle for a secure fit - 15" x 10" x 5" deep - Easy to install

- Made in U.S.A. (Maysville, KY) - Shallow baskets carry notebooks, boxes or other articles that lie flat - Dimensions: 15 x 10 x 4.75 inches; the basket tapers to 13 x 8 inches at the bottom - Extended handlebar clamps fit 7/8" and 1" diameter handlebars, and 1 3/4" apart to offer clearance for shift and brake cables - Baskets have 2-piece legs which extend from 14 inches to 22 inches and mount to either the axle or fork eyelets on bikes with quick release front hubs - 1372 has a Zinc plated finish; 1372GB has a Black Powder Coat Finish - Complete basket with fittings weighs 2.2 lbs.

• Made in U.S.A. (Maysville, KY) • Shallow baskets carry notebooks, boxes or other articles that lie flat • Dimensions: 18 x 13 x 6 inches; the basket tapers to 15.75 x 10.5 inches at the bottom • Extended handlebar clamps fit 7/8" and 1"diameter handlebars, and 1 3/4" apart to offer clearance for shift and brake cables • Baskets have 2-piece legs which extend from 14 inches to 22 inches and mount to either the axle or fork eyelets on bikes with quick release front hubs • 1392 has a Zinc plated finish and 1392GB has a Black Powder Coat Finish • Complete basket with fittings weighs 2.6 lbs.

- Made in U.S.A. (Maysville, KY) - Same as the Wald 1392 Front Basket except with hardwood slats for an elegant look - Dimensions: 18 x 13 x 6 inches; the basket tapers to 15.75 x 10.5 at the bottom - Extended handlebar clamps fit 7/8" and 1" diameter handlebars, and 1 3/4" apart to offer clearance for shift and brake cables - Baskets have 2-piece legs which extend from 14 inches to 22 inches and mount to either the axle or fork eyelets on bikes with quick release front hubs - Zinc plated finish - Complete basket with fittings weighs 4.6 lbs.

The 157's little brother, this basket is just as functional. Some people don't need to cart around large pizzas or multiple full-size grocery bags, so this basket is for the more streamlined commuters and delivery pros. Sturdy one-piece legs offer all the support you'll need when hauling heavier loads. This rack cannot be used on bicycles with front suspension systems or springer forks. - Standard front bicycle basket fits most bikes - Adjustable legs mount to front axle for a secure fit - 18" x 13" x 6" deep - UV Weather-resistant bike basket - Available with wooden bottom to better hold your cargo

- A unique blend of functionality and style - Offers the convenience of carrying your gear within easy reach of the handlebar - The only basket in Wald's lineup that offers lowered front and side wires for just a touch of unique appeal - Hardware included - UV and weather resistant - 14" x 9" x 7"

This versatile basket is the most adaptable front basket Wald offers. - Made in U.S.A. (Maysville, KY) - Deep basket that is sized for a grocery sack - Dimensions: 14.5 x 9.5 x 9 inches; basket tapers to 12.25 x 7 inches - Extended handlebar clamps fit 7/8" and 1" diameter handlebars - Two-piece adjustable legs extend from approx. 14 inches to 22 inches and mount to either the front axle or fork eyelets for bikes with quick release front hubs - Available in gloss black (198GB) or white (198WH) Powder Coat Finish - Complete basket weighs 3 lbs.

Wald bicycle racks offer a simple rear rack design for easy use. Lightweight, yet sturdy construction with simple mounting points located at eyelets near the rear axle and the brake mount. The 215 works perfectly with Wald's innovative 582 rear folding basket. - Simple design for easy use - Lightweight, yet sturdy - Steel rack w/adjustable brake bolt mount - Loading surface = 13" x 5" - Lightweight at just over 2 pounds

This front basket system uses a bolt-on handlebar mount to allow for quick and easy removal of the basket itself. - Extended handlebar clamps allow greater clearance for shift and brake cables - Requires 3.5" of handlebar clearance for mount - Fits 7/8" to 31.8mm handlebars - Made in USA - Dimensions: 11.75 x 8 x 9"

This versatile basket is based on Wald's popular 133 basket but uses a holder that bolts onto your handlebar. The holder offers greater clearance between the bar and basket for shifters, cables, and brake levers. Available in white (3133WH) or gloss black (3133GB) powder coat finishes. - Made in U.S.A. (Maysville, KY) - A Quick Release Basket with Bolt-on Holder for stable installation and use - Lift the handle to remove the basket and take it with you - Basket locks back in place when returned to the holder - Dimensions: 14.5 x 9.5 x 9 inches; the basket tapers to 12.25 x 7 inches at the bottom - Holder designed to fit 7/8", 1" and 31.8mm diameter handlebar - Handlebar clamps are 2" apart and offer clearance for shift and brake cables - Powder Coat Finish - Complete basket including the holder weighs 3 lbs.

Available in white (3339WH) and gloss black (3339GB) powder coat finishes - Made in U.S.A. (Maysville, KY) - Dimensions: 14.5 x 9.5 x 9 inches (1.25-inch rail on all sides - Two-piece adjustable legs extend from 14" to 22" and mount to either front axle or fork eyelets on bikes with quick release front hubs - Extended handlebar clamps allow greater clearance for shift and brake cables - Handlebar clamps are enlarged to fit 1 1/4", 1" or 7/8" OD handlebars - Rack is furnished with metric fasteners - Combo comes with a Wald 3133 quick release basket (dimensions: 14.5 x 9.5 x 9 inches; tapering to 12.25 x 7 inches) - Basket nests in the rack and locks into place - Lift the handle to release the basket and take it with you - Complete rack and basket combo weighs 4.8 lbs. each

Wald's medium size twin rear carrier basket is a durable way to carry heavier loads. With mounting points at both the seat stays and near the rear axle, you can haul more groceries, gear, or anything else you need to with less impact on your bicycle's handling. By placing the bulk of your load around the rear wheel, you increase your bicycle's stability. This allows you to carry 1-2 small grocery bags in each side basket with greater confidence and ease. - Made in U.S.A. (Maysville, KY) - These are 1-piece twin carrier baskets designed to fit on rear of the bicycle - Dimensions: 6.5 x 13.5 x 10 inches; tapers to 4.5 x 11.5 inches at the bottom - Rack is 5" by 13" long - Baskets can be mounted to frame eyelets or use the supplied mounting bracket - Legs have two axle mounting holes and one small hole to mount to the eyelet - 520 has a Zinc Plated Finish; 520GB has a Black Powder Coat Finish - Complete basket with fittings weighs 5.3 lbs.

Wald's big boy rear twin carrier offers tremendous amounts of cargo capacity. The 535 Twin Rear Carrier Basket lets you haul a reusable grocery bag in each basket with room to spare. With mounting points at both the seat stays and near the rear axle, you can haul more groceries, gear, or anything else you need to with less impact on your bicycle's handling. By placing the bulk of your load around the rear wheel, you increase your bicycle's stability. This allows you to carry your groceries, gear, computer, or backpack with greater comfort and ease. - Made in U.S.A. (Maysville, KY) - These are 1-piece twin carrier baskets designed to fit on rear of the bicycle - 7.5 x 18 x 11 inches; taper to 5 x 16 inches at the bottom - Rack is 5" x 16" long - Baskets can be mounted to frame eyelets or use the supplied mounting bracket - Legs have two axle mounting holes and one small hole to mount to the eyelet - 535 has a Zinc Plated Finish; 535GB has a Black Powder Coat Finish - Complete basket with fittings weighs 7.2 lbs.

The Wald 585 rear basket sits atop your bicycle's rear rack. Perfect for hauling full-sized grocery bags, small laptop bags, spare clothes, or maybe even storing your helmet while parked. - 14 x 9 x 9 inches - Fits on rear rack of bicycles - Sturdy steel construction - Made in the USA

A classic Wald design, this Flashlight Holder can clamp a standard size flashlight to your handlebar or serve as a convenient wall mount.

By using the accessory bolt mounts on a frame or fork, the Wald Standoff kit allows the user to space a basket or rack away from other components that would otherwise be in the way, like disc brake calipers. - 2 Phillips head frame bolts in 1.5-inch (38mm) length - 2 Standoff spacers in 1-inch (25.4mm) length

The VO Porteur Rack is a traditional-style rack as used on the famed Parisian newspaper delivery bikes. Those Parisian delivery bikes were reputed to carry as much as 110lbs. of newspapers on similar racks (of course, the bikes had strengthened frames and forks, not just racks). Our Porteur Rack is made from strong stainless steel tubing and polished to a lovely shine. It won't rust like painted steel racks or fatigue and crack like aluminum racks. The quality is actually superior to that of many custom racks. In short, this is a real load-carrying rack, not an aluminum "style-rack". Yet total weight with rail, nuts, bolts, etc. is only 1.079kg. The platform is about 36cm x 29cm. A removable rail attachment is included and very handy for smaller packages. The tangs are pre-drilled to fit 700c, 27", 26", and 650b bikes. There are four bosses for a light attachment. There is a boss for securing your fender to the rack -- no rattling! Please also note the elegant pannier/tie-down loops above the mounting tangs. Mounting hardware is included. The Porteur Rack mounts to the dropout eyelet and the brake bolt (or fork crown hole). Max weight with this configuration is 25 lbs.

These are simple polished stainless steel struts which can be used to mount many of our racks to your bike's brake bridge or fork crown. Available in Small and Large sizes. - Small is 8.5cm long from end to end - Useful for mounting our Constructeur Rear Rack to your brake bridge. - Useful for mounting our Constructeur Rear Rack to your brake bridge. Also used for mounting our Randonneur, Constructeur Front, and Porteur Racks to your bike's fork crown. - Note: not required if you mount the rack to metal fenders, as is traditional.

Common on European utility bikes, a front wheel stabilizer makes loading front racks simpler. It is a spring connecting the fork to the down tube. It adds a subtle self centering action to the front wheel, making loading and unloading of a bike with a basket, or say, our Porteur Rack much easier. The spring also offers some resistance to steering, so it counteracts deflections from hitting potholes and road debris. - Mounts to the back of the fork crown via brake bolt or through bolt - Fork crown mount diameter is made to fit an M6 bolt - common on nutted calipers - Use Sheldon's Fender Nuts to work with recessed brake bolts - Rust resistant and includes all required brackets and hardware - Available for Small (31.8mm and smaller) and Large (38-62mm) sized downtubes

The Gel Fuel Rack / NDM 1 give the user the ability to reach their gels and similar snacks at any time while our on the trails. The "grab-n-pull" aspect of the rack makes it super fast for you to fuel up with new energy. The accessory is compatible with backpacks equipped with the No Dancing Monkey 1.0 and No Dancing Monkey 1.2 harnesses. This attachment is compatible with the following products: - Raw - MTB Hydro - Airborne - Ranger - Patriot - Vertical - Outlander (NOT Compatible with Outlander PRO) With the Gel Fuel Rack / NDM 1 you'll always have instant access to your gels or other small snacks. The "grab-n-pull" make it super fast to fuel up with new energy. The accessory can be attached to the harness of all backpacks equipped with the No Dancing Monkey 1.0 and No Dancing Monkey 1.2 harnesses. The accessory is simply attached to the Velcro shoulder strap. This attachment is compatible with the following products: